Cabbirka Duuliye Jaakad ee Nustsche Shaandheeyaha Dhalada
"#" Nooca Qaab-dhismeedka | Daboolka Reactor go'an & Jirka Weyn (GFR)
● "#" Nooca Qaab-dhismeedka, ilaali xasiloonida guud ee qalabka.
● Meel Dhimasho ah oo Deked ah oo Deked ah PTFE ma jirto, iyada oo la marayo tuubada PTFE ee isku xidhka degdega ahqaadashada falaash.
● Dhalada qaataha iyo dawada sifaynta ayaa si madax banaan loo nashqadeeyay, taasoo badbaadinaysa meel banaan oo hawleed.
● Xirmooyinka Kala Duwan ee Saliida Daadi si fudud u daadi dareeraha wareegga iyada oo aan la firdhin oo yaree walwalka alaabta dhalooyinka.
● Dekadaha wareeggu waa kuwo tamashle ah oo ka fogaanaya kulaylka deegaanka, gaar ahaan agagaarka dekedaha wareegga. Giraanta Baffles gudaha lakabka kulaylka waxay wanaajisaa kala-guurka kulaylka ee degdega ah iyo qaybinta heerkulbeegga isku midka ah. (Ikhtiyaar ah 10-50L).
● Naqshad buuxda oo jaakad ah, jaakada kulaylka waxay si buuxda u dabooshaa weelka habka kaas oo bixiya kulaylka ugu badan ee habka loo wareejiyo. (Ikhtiyaar ah 10-30L).
"H" Nooca Qaab-dhismeedka qaab-dhismeedka
● Qaabdhismeedka Nooca "H", kaliya ma ilaalinayo xasilloonida, laakiin sidoo kale wuxuu si weyn u badbaadiyaa booska.
● "H" Nooca Qaab-dhismeedka Qaab-dhismeedka Reactor, jirka ugu muhiimsan waxaa lagu qaadi karaa 400mm & Wareegid Wareega 180 ° (wareejin toosan); Ku habboon daadinta walxaha viscosity-sare, crystal, alaabta adag iyo nadiifinta
"H" Nooca Qaab-dhismeedka | Daboolka Reactor waa la qaadi karaa | Jidhka Wayn Waxa Uu Noqon Karaa Wareegid Toosan (GFR-LT)
Daboolka Reactor si toos ah ayaa kor loogu qaadi karaa, iyada oo aan dhaqaaqin mootada, kicinta suufka iyo qaybaha kale ee u soo baxa jidhka ugu muhiimsan, Reactor Main Body waxa lagu wareejin karaa 180°.
Qaabka | Dhererka Reactor | Daboolka la qaaday | Ka dib markii la qaaday |
GFR-10LT | 1205 | 840 | 2045 |
GFR-20LT | 1515 | 900 | 2415 |
GFR-30LT | 1755kii | 950 | 2705 |
GFR-50LT | 2390 | 1080 | 3470 |
Naqshad buuxda oo jaakad ah
Naqshad buuxda oo jaakad ah, jaakada kulaylka waxay si buuxda u dabooshaa weelka geeddi-socodka kaas oo siinaya wareejinta kulaylka ugu badan ee habka.(Ikhtiyaar ah 10-50L)
Module sifaynta PTFE
PTFE Dahaarka O-ring
● Gaaska PTFE oo leh dunta birta ee dibadda
Gaaska fidsan ee PTFE
● Xuubka/dharka PTFE (kuma jiraan sida caadiga ah)
● Saxanka dhalada ah ama looxa PTFE ee godadka leh
● PTFE sabuuradda oo leh dun bir ah oo gudaha ah
● PTFE & Dhalada soo daaya Valve
● Qaadista/Dhaqdhaqaaqa Gaadiidka
● Tuubooyinka PTFE
● Dhalada qaadata dhalada
Saxanka dhalada ah
looxa PTFE oo godadka leh
Qaadista Haydarooliga/Dhaqdhaqaaqa Gawaarida si ay u fududaato Rakibaadda Module-ka ama kala dirida (Ikhtiyaar)
Matoorka Kicinta
Matoor aan burush lahayn DC | AC Induction Motor with Gear Reducer | EX DIIBT4 Qarxinta Matoorka | Matoorka hawada
Isku-dhafka Xirmooyinka Xirmooyinka
PTFE + Shaabadeynta dhoobada | Dharka labanlaaban ee dhoobada ah, Ma jiraan Qashin Xiro | Deganaansho Taam ah oo aan lahayn Lulid Dhaqdhaqaaq Sare.
Usha kicinta ee PTFE
Unibody SUS304 Dahaarka leh PTFE Stirring Rod iyo Impeller Wasakh la'aan | Xulasho badan oo loogu talagalay Impellers Nooca Barroosinka PTFE, Nooca Paddle-Ptched, Nooca Frame.
Reactor Main Body
Hal/Labo/Saddex Lakab |Stayel Isku-dhafan | Goobaysan | Silinder
Tuubada Xidhiidhka Dahaarka
Ilaali Markabka Reactor | Iska yaree culayska saaran markabka Reactor | Si fudud u daadi dareeraha wareegga wareegga iyada oo aan la dillaacin
Qulqulka Valve
Naqshad rukhsad leh, majirtay, ma daadato | Eber Dhimasho | Dekadda Soodejineed ee La Diiday ayaa la fidiyay ilaa 35mm
Qaabka* | GFR-10 | GFR-20 | GFR-30 | GFR-50 | GFR-100 | GFR-150 | GFR-200 |
①Ikhtiyaar | GFR-10T | GFR-20T | GFR-30T | GFR-50T | - | - | - |
GFR-10LT | GFR-20LT | GFR-30LT | GFR-50LT | - | - | - | |
Walxaha dhalada | Muraayadaha sare ee Borosilicate 3.3 | ||||||
Qaab dhismeedka | "#" ama "H" Qaab-dhismeedka Nooca | "#" Nooca Qaab-dhismeedka | |||||
Qaybaha qoyan | Muraayadaha iyo PTFE oo aan lahayn Wasakh Wasakh-Bir ah | ||||||
Awoodda Reactor | 10L | 20L | 30L | 50L | 100L | 150L | 200L |
Nooca Jaakada* | Sooth Wall gudaha jaakada kulaylka | ||||||
②Ikhtiyaar | Garaac Baffles gudaha jaakada kulaylka | - | |||||
Naqshadaynta Jaakada Buuxa | Naqshad Jaakad Aan Buuxin | ||||||
Mugga Jaakada kulaylka | 3L | 6L | 9L | 15L | 30L | 45L | 60L |
Aagga sifaynta | 363 cm² | 615cm² | 615 cm² (1256 cm² ayaa la habeeyay) | ||||
Sifeynta Micron | Micron: 0.2μm ilaa 200μm | ||||||
Matoorka Kicinta* | AC Induction Motor oo leh Gear Reducer | ||||||
120W | 120W | 120W | 250W | 250W | 400W | 400W | |
50 ~ 600 RPM | |||||||
③Ikhtiyaar | Ex DIIBT4 Mootada Cadaynta Qaraxa | ||||||
180W | 180W | 180W | 250W | 370W | 750W | 750W | |
50 ~ 600 RPM | |||||||
Xakamaynta iyo Bandhigga Isku-dhafka ah | Xawaaraha Kicinta Hadda/Heerkulka Alaabta | ||||||
Rod walaaqaya | Unibody SUS304 Dahaarka leh PTFE Stirring Rod iyo Impeller | ||||||
Kicinta Impeller | Nooca Barroosinka PTFE, Nooca Paddle-ka La Dajiyay, Nooca Qaabka | ||||||
Shaabadeynta Agitator | PTFE + Xirmooyinka dhoobada oo labanlaab ah | ||||||
Daboolka dhalada* | 265# | 340# | 340# (465# la habeeyay) | ||||
7 Furitaanka: ● Quudinta Quudinta: 40/40 ● Quudinta Alaabta Adag: 95# Qoorta Flange ● Kiciya: 60# Qoorta Flange ● dareeraha-quudinta: DN25 ● Baaritaanka heerkulka: DN25 Dib-u-soo-celinta kondenser-ka: S50/20 ● Siideynta Cadaadiska/Vacuum Port/Gaaska-gaaska: 34/34 ama / Nadiifinta Nadiifinta: DN25 ama PH cabbirka: 50# Qoorta Flange ama Qoorta Ultrasonic ee la Habeeyay | |||||||
④Ikhtiyaari | - | 8 Furan ● Quudinta Quudinta: 40/40 ● Quudinta Alaabta Adag: 95# Qoorta Flange ● Kiciya: 60# Qoorta Flange ●Dareere-quudinta DN25 ● Baaritaanka heerkulka: DN25 Dib-u-soo-celinta kondenser-ka: S50/20 ● Siideynta Cadaadiska/Vacuum Port/Gaaska-gaaska: 34/34 Nadiifinta buufinta: cabbirka DN25 ama PH: 50# Qoorta Flange ama Qoorta Ultrasonic | |||||
Dheefta Quudinta Cadaadiska Joogtada ah* | Funnel Quudinta Quudinta Lakabka Keliya oo leh PTFE Irbad Valve iyo Cudud Siman | ||||||
2000 ml | |||||||
⑤Ikhtiyaari | 1) Funnel Quudinta Dhalooyinka Jaakada Leh 2) Funnel Quudinta Budada | ||||||
Baaritaanka Heerkulka | PT100 oo leh lakabka PTFE +/-1°C | ||||||
Condenser | Qaboojiyaha labajibbaaran ee qaboojiyaha | ||||||
Aagga qaboojinta | 0.4 M² | 0.4 M² | 0.4 M² | 0.4 M² | 0.9 M² | 1.5 M² | 1.5 M² |
Heerkulka shaqada | .-90°C ilaa +230°C | ||||||
ΔT - Iska caabinta shoogga kulaylka | 90°C (Darbiga Laba-laaban), 60°C (Darbiga Saddexda ah) | ||||||
Cadaadiska Shaqada | Fakuum Buuxa oo Cadaadiska Hawada | ||||||
Cadaadiska Jaakada ee shaqaynaysa | Ilaa +0.5 bar (0.05 MPa) | ||||||
Bixinta Korontada | 220 ~ 240V, 50Hz/60Hz ama Customized | ||||||
Odhaah | ①GFR-10/50T, Reactor Main Body waa la kicin karaa & Wareegid toosan (Rotation Vertical 180°); GFR-10/50LT, Daboolka Reactor waa la qaadi karaa (Alaabada Qashinka ama Reactor Nadiif ah oo aan Dhaqdhaqaaq lahayn, Kicinta Baasaska iyo Baarista goonida ah);Jidhka ugu weyn waxa uu noqon karaa wareegtada toosan (wareejin toosan 180°) ②Ring Baffles gudaha jaakada kulaylka ah waa doorasho Ikhtiyaar ah oo loogu talagalay 10 ~ 50L Reactor; Gaar ahaan Habka Xakamaynta Heerkulka Saxda Sare ee Sare; Naqshadaynta Jaakada Buuxa waxa kaliya oo loo heli karaa Reactor 10 ~ 30L. ③Wax-ka-qabashada Baabuurta, Baaburka Caddeynta Qarxuhu waa ikhtiyaarka cusboonaysiinta. Qalabka Viscous Sare, Waxaa loo cusboonaysiin karaa 550W 750W iyo 1500W Matoorada Awood-sare ah. ④8 Furitaanka waa Ikhtiyaarka gaarka ah ee 30 ~ 200L. ⑤Cadaadiska Joogtada ah ee Quudinta Quudinta waxaa lagu bedeli karaa: ● Funnel Quudinta Muraayadaha Jaakada leh; ● Funnel Quudinta budada; ● Quudinta Bambada Joogtada ah ama Bambooyin kale oo Cabbiraya Quudinta |